ToolKing http:// www. Toolking .com

Bessey CDF412C Bessey CDF412C 12" Opening Drop Forged Copper Coated C-Clamp - http://www.toolking.com : -Bessey CDF412C C-Clamp Drop Forged, Heat Treated Steel Frames, Black Oxide Coated Spindle & Swivel Pad to Resist Corrosion. 12" Capacity x 5-3/4" Throat Depth.

Bessey CM50 Bessey CM50 - 5" C-Clamp, Malleable Cast - http://www.toolking.com : -Bessey CM50 - 5" C-Clamp, Malleable Cast Ductile Iron Frame and Hardened Steel Spindles w/ Swivel Pads. 5" Capacity x 3.25" Throat Depth.

Bessey BC 550V Bessey Reco Induction Bearing Heater BC 550V 22"O.D.x 7" W 550 Volt - http://www.toolking.com : -Bessey Reco Induction Bearing Heater BC 550V 22"O.D.x 7" W 550 Volt Capacity: bearings up to 8" wide and 22" OD or 32" O.D. with optional raising blocks

Bessey BC 3/4" Bessey Reco Induction Bearing Heater 3/4" X 3/4" X 14-3/4" Cross Bar for BC - http://www.toolking.com : -Bessey Reco Induction Bearing Heater 3/4" X 3/4" X 14-3/4" Cross Bar for BC

Bessey BCS 3" Bessey Reco Induction Bearing Heater 3" X 3" X 18-3/4" Cross Bar for BC Special - http://www.toolking.com : -Bessey Reco Induction Bearing Heater 3" X 3" X 18-3/4" Cross Bar for BC Special

Bessey WMS-3 Bessey WMS-3Magnetic Square - 55 lbs pull - http://www.toolking.com : -Bessey WMS-3 Magnetic Square is like having an extra hand. These quality, ferrite and rare earth magnets are used for fast and simple set-ups It holds work at set angles WMS-3 - 55 lbs. pull

Bessey MGC-2 Bessey MGC-2 Magnetic Ground Clamp (800 amp) - http://www.toolking.com : -Bessey MGC-2 Magnetic Ground Clamp is Spring loaded electrode secures ground to work surface; rotating stud assembly allows ground wire to rotate 360 - free of work area. This ground clamp is fitting with handles for ease-of-use. Connection stud is 1/2

Bessey 46R Bessey Screw On Tips for 773 Hammers (1 1/2" Diameter) Red (medium) tip 1-1/2" Dia. - http://www.toolking.com : -Bessey Screw On Tips for 773 Hammers (1 1/2" Diameter) Red (medium) tip 1-1/2" Dia.

Bessey 57BL Bessey Screw On Tips for 775 HammersBlack (hard) tip 2" Dia. - http://www.toolking.com : -Bessey Screw On Tips for 775 HammersBlack (hard) tip 2" Dia.

Bessey B753F Bessey 3 lb. Brass Hammer w/ Fiberglass Handle - http://www.toolking.com : -Meets GGG-H-33A US Government Specs. High purity brass head; long life; non-sparking; non-magnetic

Bessey C764F Bessey 4 lb. Copper Hammer w/Fiberglass Handle - http://www.toolking.com : -Meets GGG-H-33A US Government Specs. 99.9% pure copper head for long life - non-sparking and non-magnetic

Bessey SF-4 Bessey 4 lb. Dead Blow Hammer - http://www.toolking.com : -Shot-loaded head: 30% more force, no recoil. Compound head - lamination won't breakdown or "mushroom"; heat resistant - outlasts metal and rawhide by as much as 20 times - non sparking

Bessey SHD-5H 5" Head Only - http://www.toolking.com : -5" Head Only

Bessey BHD-4 4-3/4" Head - 4 lb. 11" Length - http://www.toolking.com : -Variety of weights for light to medium duty impacts. Non-destructive, wear resistant brass

Bessey BHD-9H Brass Sledge 6" Head Only - http://www.toolking.com : -Brass Sledge 6" Head Only

Bessey HT-24 Alvin HT-24 High Temp Lab Metal (24 oz. can) Ready to use Metal Putty - http://www.toolking.com : -Alvin HT-24 24 oz can of High Temp of Lab Metal is the orignal ready-to-use metal putty. Spreads from from the can - no mixing - hardens quickly to metal! Can be drilled, tapped, ground, macinede, chiselled, milled and sanded to a feathered edge. With

Bessey 1000L 1" Stud Size - Longer Reach - http://www.toolking.com : -Self-positioning, single component design, swivel rocker attached body - prevents loss, instant set-up and eliminates shim stock, wide clamping range - instant adjustment to 5", strong,ductile iron body

Bessey 2KT 2" Max. Opening - http://www.toolking.com : -Unique cantilever clamp with floating jaws that always stay parallel. Built in "V" block to hold round stock - copper plated jaws and screws resist weld spatter.

Bessey K3.550 50" K-Body Clamp - http://www.toolking.com : Large patented parallel jaws distribute pressure evenly Jaws are always at 90 degrees to the rail Cold drawn, profiled steel rail with serations Super-polyamid encases the steel jaws. Jaws are non-marring and glue resistant. Sliding jaw has dual set screws. Set screws lock onto rail. Ergonomic wood handles 50" rail length (max. opening), 3-1/2" throat. Provide 1000 lbs. of pressure. Ideal for frame-less construction, free-frame cabinet construction, furniture construction, countertop fabrication, and all gluing applications including face-to-face and edge-to-edge

Bessey TGJ2.512 12" Medium Duty Tradesman Bar Clamp - http://www.toolking.com : Original Bessey design Unique non-slip locking mechanism Patented profile rail minimizes flexing and bending, one beam design Zinc finished end rail Protective non-marring pads Ergonomical grip wood handle 12" rail length (max. opening), 2-1/2" throat. 1" x 1/4" nominal rail size. Provides 600 lbs. of pressure.

Bessey LM4.008 LM 8" Light Duty General Purpose Clamp - http://www.toolking.com : A terrific light duty clamping tool Bright drawn steel rail Large Acme thread Ergonomic wood handle Large, glue resistant caps 8" rail length (max. opening), 4" throat. 31/32" x 15/64" nominal rail size. Provide 550 lbs. of pressure.

Bessey K3.582 K Body® Parallel Clamp - 82" Opening 1000 lbs. pressure - http://www.toolking.com : -Original Parallel Clamp designed for Woodworkers . Poly-Clad Steel Jaws. Over sized Acme Thread tightens to 1000 lbs. of pressure, Large Wooden Handle, Large 90 Parallel Jaws, Unique Jaw Locking System dual locking set screw permanenatly moldied into t

Bessey TGJ2.524 Medium Duty Tradesmen™ Bar Clamp 2.5" Throat - 24" Opening 600 lbs. pressure - http://www.toolking.com : -Bessey Tradesmen™ Medium and Heavy Duty Bar Clamps cater to all professional and do it yourself trades. They have glue resistent plastic caps to protect work space. A large diameter pad surfeace to minimize dimpling. Oversized Acme treaded spindle.

Bessey TGK4.524 Heavy Duty Tradesmen™ Bar Clamp 4.5" Throat 24" Opening 1540 lbs. pressure - http://www.toolking.com : -Bessey Tradesmen™ Medium and Heavy Duty Bar Clamps cater to all professional and do it yourself trades. They have glue resistent plastic caps to protect work space. A large diameter pad surfeace to minimize dimpling. Oversized Acme treaded spindle.

Bessey TG7.040 Heavy Duty Tradesmen™ Bar Clamp 7" Throat 40" Opening 1320 lbs. pressure - http://www.toolking.com : -Bessey Tradesmen™ Medium and Heavy Duty Bar Clamps cater to all professional and do it yourself trades. They have glue resistent plastic caps to protect work space. A large diameter pad surfeace to minimize dimpling. Oversized Acme treaded spindle.

Bessey CDS-20-10WP Bessey CDS2010WP Heavy Duty Tradesmen™ Bar Clamp - http://www.toolking.com : -High Quality Heavy Duty Bar Clamp with 10" Throat Depth, 20" Opening and 1550 lbs. Of Clamping Pressure

Bessey Clamp PC-34 3/4" Pipe Clamping - http://www.toolking.com : Plated spindles to Prevent Rust and corrosionCluch action grips bar automaticallyLarge handel positive pressurePipe not included

Black & Decker U1321 6" Cotton Buffing Pad - http://www.toolking.com : 6" x 5/8" x 1/2" For high lustre finish on metal, silverware, chrome trim and plastic Used with (BD #U2206) 1/2" universal wheel arbor, fits all brands of 1/4", 3/4" and 1/2" portable electric drills Without wheel arbor, use with drill presses

Black & Decker 95050 7" Polishing Bonnet w/ 3/4" Pile - http://www.toolking.com : For automotive waxing and polishing Can be used with all types of polishers/li 6" diameter, 3/4" pile height

Blackhawk Automotive B93075 Porto-Power Anchor Pot - http://www.toolking.com : Designed with heavy-duty protective ring which prevents chipping of concrete. 3-1/8" diameter.